Spray paint your easter egg and let it dry overnight.
Make your words by what ever method you prefer (see note below). I choose to use the Cricut Explore Air 2 for this project so I will describe how I did that.
Download 'The Skinny' font and install it to your computer.
Open Cricut Design Space and click on text. Then, select the system font tab and search for the font.
Type your words and make them 4.5"-5" wide if you are using the Dollar Tree easter egg.
Cut your vinyl and transfer tape down to the size you are going to use. I did 5.5 x 6.5 to leave a little room on the sides.
Load mat with vinyl into the machine.
Select the correct material type and settings and press go to begin cutting your project.
Weed the vinyl by removing everything but the letters from your vinyl.
Remove the backing from the transfer tape and align it with the vinyl.
Press the transfer tape down onto the vinyl and rub the tape on the vinyl firmly with the scraper tool or a credit card.
Peel the vinyl backing from the transfer tape carefully.
Align your words in the center of the easter egg.
Rub the tranfer tape down on the easter egg using your scrapper tool.
Slowly start peeling the tranfer tape from the vinyl. Flatten any bubbles with your scraper tool.
Glue down the twine along the edges of your easter egg.
Glue your burlap ribbon at the top of the easter egg in the center.
Cut a small piece of twine. Loop and tie it around the hole in the top for hanging.